Gutters, Downspouts & Gutter Covers
Summit Construction Group offers a wide array of gutter options. Our seamless gutters are custom made to length on site from a gutter machine. They run up to 100′ and can be seamless. Corners are hand tailored miters. Longer runs, which are extremely rare, may require a seam. Downspouts come in 10′ lengths. We also offer 3 different types of gutter covers but we do not offer plastic gutter covers. See below for more information on specific options. Pricing is available upon request.
Color Options
K-Style Gutters are the typical gutter found on most homes. They are rolled on site to the desired length and fastened with screws through the fascia and/or with hangers that extend onto the roof deck below the shingle. They are made of a powder coated aluminum to prevent rusting. Older style steel gutters would rust out in the corners or in low spots, as a result most gutter companies have shifted away from steel.
- 5″ K-Style Gutters – Standard
- 6″ K-style Gutters – Used for larger steeper roofs or some commercial applications
Downspouts come in 10′ lengths. The gutters are made from a powder coated aluminum. Many color options are available, see the color chart below.
- 2″ x 3″ Downspouts – (We do not offer these, and use 3″ x 4″ for the same price)
- 3″ x 4″ Downspouts – This is our standard size, less prone to clogging and creasing
- 4″ x 6″ Downspouts – These are commercial grade, however, they get very expensive since they are a rarely used and are also a custom ordered product.
Gutter Covers
Summit offers 3 different types of gutters covers. If needed, gutters are cleaned of any debris before covers are installed. Cleaning is $2 per foot.
Standard
Metal Screens – These are our entry level gutter covers, which are a rigid metal screen that snaps into the lip of the gutter and tucks below the shingle.
- Cost effective way to keep debris out of your gutters
- Recommended for homes with light tree coverage
- Comes in black only
- Standard Grade
High-Grade
Bulldog Gutter Guard is a proven system that comes in at a mid range price point. The aluminum panels have machine drilled holes which are fairly small to help prevent clogging while still allowing water to flow in at a high rate. Recommended for certain areas.
- Available in White or Dark Bronze, invisible from the ground
- Fits new or existing gutters
- Made from 98% recycled aluminum
- Allows leaves to blow away with a light breeze
- Front and rear attachment strengthens entire gutter system
- High Grade
Premium Grade
LeafBlaster Pro
- Stainless Steel Micro-Mesh
- Lifts debris off the mesh so it can blow off naturally, and improves water flow.
- 40 year manufacturer warranty
Premium Grade
Leaf Sentry – These helmet style covers are recommended for homes with high tree coverage.
- Provides maximum defense against clogging from leaves and debris
- Water rolls over the edge of helmet using waters natural surface tension and into the gutter
- Made of aluminum with a powder coated finish
- Available in 16 colors and copper – See color chart below
- 4′ panel lengths
- Premium Grade
Premium Grade
Leaf Sentry High Flow Panels – These helmet style covers are recommended for homes with high tree coverage.
- High flow panels have additional water slots to prevent runoff of water on homes with steep roofs or sections with large surface area. Recommended for larger roofs or roofs 7/12 pitch and over.
- Provides maximum defense against clogging from leaves and debris
- Water rolls over the edge of the helmet using waters natural surface tension and into the gutter
- Made of aluminum with a powder coated finish
- Available in 16 colors and copper – See color chart below
- 4′ panel lengths
- Premium Grade
Custom Gutters
Copper Gutters are often found on high value homes as they have an unmatched look that can set off curb appeal of any unique property.
- Copper does not rust or corrode and can also last an extremely long time
- Develops a beautiful brownish green patina as it oxidizes over time
- Rolled seamless from a gutter machine
- Corners are hand mitered and soldered together
Available Styles:
5″ K style Copper Gutters
6″ K style Copper Gutters
6″ Half Round Copper gutters, shank and hanger mounted
3×4″ Downspouts – 10′ lengths
4×6″ Downspouts – 10′ lengths
4″ Corrugated Round downspouts – 10′ lengths (typically used with half round gutters)
6″ Half Round Gutters can also be done in Aluminum or Steel. Aluminum comes in a wider range of colors as shown near top of page in gutter color chart
Connect with Us
Let's Get In Touch
Please contact us for more information about our services or to request a quote.
